Menu Close

Home

Profile

Products

Applications

How to Use

Storage

Blog

Contact Us

Home Product Redispersible polymer powder(RDP)LIWEI 5111 L
LIWEI 5111 L

LIWEI 5111 L

ANHUI LIWEI CHEMICAL CO.,LIMITED

[Introduction]

LIWEI 5111 L is a dispersible polymer powder for dry mix mortars, specifically suited for self-leveling flooring compounds and screeds. It is based on a hard copolymer of vinylacetate and ethylene and belongs to the product class LIWEI L which means that it improves the leveling and surface properties as well the stabilization of the fresh mortar.Cured mortars with LIWEI 5111 L have improved adhesion, flexural strength, deformability and abrasion resistance.

[Properties]

• LIWEI 5111 L is a copolymer powder of vinyl acetate and ethylene and is dispersible in water.

• As a polymeric binder LIWEI 5111 L will provide very good workability to the fresh mortar.

• Cured mortars with LIWEI 5111 L have improved adhesion, flexural strength, deformability and abrasion resistance.

• LIWEI 5111 L is a dispersible hard polymer powder and greatly enhances leveling. It contains a fine mineral filler as an antiblocking agent and is produced without the use of organic solvents, plasticizers and film-forming agents.

• LIWEI 5111 L is especially advantageous in combination with synthetic superplasticizers or casein for the production of self-leveling flooring compounds and screeds.

• Special features of LIWEI 5111 L are its very good defoaming properties even without additional defoamer in the mortar formulation. This results in exceptionally smooth, uniform surfaces without air bubbles while also offering high abrasion resistance, flexural and compressive strength.

• Furthermore it allows self-leveling flooring compounds to be formulated with a low content of volatile organic compounds (VOC).

• The product thus can be used to produce self-leveling flooring compounds conforming to strict eco-labeling requirements.

• Additionally LIWEI 5111 L greatly enhances leveling at low viscosity.

INQUITRE NOW

[Specification]

Property Condition Value Method
Ash content 1000 °C max. 13 % specific method
Solids content - min. 98 % DIN EN ISO 3251
Bulk density - 450 - 600 kg/m³ DIN EN ISO 60
Particle size > 400 µm max. 2 % DIN EN ISO 4610

[General Characteristics]

Property Condition Value Method
Appearance - white to light beige powder Visual
Minimum film forming temperature - 4 °C DIN ISO 2115
Protective colloid / emulsifier system - polyvinyl alcohol -

[Applications]

• Self-Leveling Compounds

[Packaging]

25 kg paper bags Big Bags or bulk on request.

[Storage]

During storage, protect the product from contact with moisture. Prolonged storage at temperatures above 30 °C, especially in combination with pressure, humidity or exposure to sunlight, may result in blocking. Carefully seal any open containers and store them under suitable conditions. We recommend storing the product in a warehouse that provides cool and dry conditions. Do not store the product for more than six months, starting from the date at which it was received,unless the Certificate of Analysis contains a different date, which would take precedence. If the product is stored longer than recommended, it may still be used but users are advised to verify the properties required for the intended use.

Home Profile Products Applications How to Use Storage Blog Contact Us Terms & Conditions

Copyright © 2010 ANHUI LIWEI CHEMICAL CO.,LIMITED China Polyvinyl Alcohol PVA Polyvinyl Alcohol PVA Fibers