Polyvinyl Alcohol PVOH®9913
ANHUI LIWEI CHEMICAL CO.,LIMITED
[Introduction]
PVOH®9913 is a fully hydrolyzed medium molecular weight polyvinyl alcohol (PVOH). Using our exclusive batch process which has advantages over other manufacturing methods,allows more efficient control over the degree of hydrolysis and particle size of the product.
INQUITRE NOWSpecifications
Appearance | Slightly Yellow grains solid |
---|---|
Total Solids wt%(min) | 98.5 |
Degree of Hydrolysis (mole %) | 98.0-99.0 |
Viscosity@20°C,4% solution (mPa.s) | 13.5±2.5 |
pH value | 5.0~7.0 |
Ash Content (as Na2O) wt% (max) | 0.4 |
VOC’s wt% (max) | 0.25 |
Packing & Storage
Packing |
In 20kg paper bag. |
---|---|
Storage |
Powder 20°C 2 years; Floccule 20°C 2 years. |
Shipping |
Room temperature 5-30℃ in China; may vary elsewhere |
Free Quote
Liwei PVA is one of the top 10 PVA factories and the top 100 strongest enterprises in anhui province.In 2010,Liwei PVA is evaluated as advanced and high technical company. We mainly deals in polyvinyl alcohol,PVA,PVA fiber and raw materials for producing PVA like vinyl acetate.
For samples, pricing, or more information, please call us at 0086-25-52397803 or mail to info@china-pva.net or fill out the following form. We will respond to you as soon as possible.
Tel: 0086-25-52397803
E-mail: info@china-pva.net

Frequently Asked Questions
GENERAL INFORMATION
PVOH®9913 is a fully hydrolyzed medium molecular weight polyvinyl alcohol (PVOH). Using our exclusive batch process which has advantages over other manufacturing methods,allows more efficient control over the degree of hydrolysis and particle size of the product.
USES
PVOH®9913 achieves the best performance in textile, paper, molding, and adhesive industry.
SOLUTION PREPARATION:
The Hot Method is the most
efficient if
dispersion / wetting of
the powder
is
an issue. The
PVOH®9913 is either added
slowly
to
water at more 90°C or to
water at
room
temperature and
then heated to more 90°C,
with
good
agitation. The PVOH®9913
will
disperse
and on cooling
will go smoothly into
solution
without
lump formation.
STORAGE AND SHIPPING:
1.PVOH®9913 should be stored away from wet areas. Ingress of moisture should be avoided to maintain product quality. 2.As supplied, PVOH®9913 should remain fit for use for 12 months from the date of delivery. Beyond that date, the material may still be fit for use, but we would advise that it is good practice to test the material. or more after delivery should be tested before use.