Polyvinyl Alcohol PVOH®990E
ANHUI LIWEI CHEMICAL CO.,LIMITED
[Introduction]
PVOH®990E is a fully hydrolyzed medium molecular weight polyvinyl alcohol (PVOH). Using the exclusive batch process which has advantages over other manufacturing methods,allows more efficient control over the degree of hydrolysis and particle size of the product.
INQUITRE NOWSpecifications
| Appearance | White granule |
|---|---|
| Total Solids wt%(min) | 96.5 |
| Degree of Hydrolysis (mole %) | 99.0 |
| Degree of polymerization | 1750±15.0 |
| pH value | 5.0-7.0 |
Packing & Storage
|
Packing |
Our polyvinyl alcohol products are packed in craft paper bag. Net weight 12.5kgs or 20kgs if floccule, Net weight 25kgs /20kgs if powder or Granule. |
|---|---|
|
Storage |
Powder 20°C 2 years; Floccule 20°C 2 years. |
|
Shipping |
Room temperature 5-30℃ in China; may vary elsewhere |
Free Quote
Liwei PVA is one of the top 10 PVA factories and the top 100 strongest enterprises in anhui province.In 2010,Liwei PVA is evaluated as advanced and high technical company. We mainly deals in polyvinyl alcohol,PVA,PVA fiber and raw materials for producing PVA like vinyl acetate.
For samples, pricing, or more information, please call us at 0086-25-52397803 or mail to info@china-pva.net or fill out the following form. We will respond to you as soon as possible.
Tel: 0086-25-52397803
E-mail: info@china-pva.net
Frequently Asked Questions
GENERAL INFORMATION
PVOH®990E is a fully hydrolyzed medium molecular weight polyvinyl alcohol (PVOH). Using the exclusive batch process which has advantages over other manufacturing methods,allows more efficient control over the degree of hydrolysis and particle size of the product.
USES
PVOH®990E achieves the best performance in textile, paper, molding, and adhesive industry.
STORAGE
1.PVOH®990E should be
stored away
from
wet areas and naked
flames.
Ingress of
moisture should
be avoided to maintain
product
quality.
2.As supplied, the product
should
remain fit for use for 12
months
from
the date of
delivery. Beyond that
date, the
material may still be fit
for use,
but
we would advise that
it is good practice to
test the
material. As such, we
advise that
material stored for 12
months or more after
delivery
should
be tested before
use.
SOLUTION PREPARATION:
The Hot Method is the most efficient if dispersion / wetting of the powder is an issue. It is either added slowly to water at more 90°C or to water at room temperature and then heated to more 90°C, with good agitation. It will disperse and on cooling will go smoothly into solution without lump formation.
