VINNAPAS 7031 H
ANHUI LIWEI CHEMICAL CO.,LIMITED
[Introduction]
VINNAPAS 7031 H is a hydrophobic basic-grade redispersible polymer powder (RDP) for dry mix mortars, specifically developed to balance hydrophobicity and basic adhesion. Based on a vinyl acetate-ethylene (VAE) copolymer formulation, it delivers reliable bonding performance and moderate water repellency, serving as a cost-effective choice for applications demanding a balance between cost and performance. This product is well-suited for conventional waterproof plaster mortars and general-purpose dry mix mortars.
• VINNAPAS 7031 H is a VAE-based redispersible polymer powder (RDP) and is dispersible in water.
• Mortars modified with VINNAPAS 7031 H exhibit improved hydrophobicity, adhesion and durability, with consistent processability. Key rheological properties such as water retention are essentially unaffected.
• The product is ideal for use in combination with other mortar additives to optimize performance of cost-sensitive waterproof mortar systems.
• VINNAPAS 7031 H is a hydrophobic basic-grade redispersible polymer powder with stable chemical properties and no adverse effect on mortar rheology.
• VINNAPAS 7031 H contains a fine mineral filler as antiblocking agent. It is produced without the addition of organic solvents, plasticizers or film-forming agents.
| Property | Condition | Value | Method |
|---|---|---|---|
| Ash content | 1000 °C | max. 16 % | specific method |
| Solids content | - | min. 98 % | DIN EN ISO 3251 |
| Bulk density | - | 450 - 650 kg/m³ | DIN EN ISO 60 |
| Particle size | > 400 µm | max. 4 % | DIN EN ISO 4610 |
| Property | Condition | Value | Method |
|---|---|---|---|
| Appearance | - | white to light beige powder | Visual |
| Minimum film forming temperature | - | 5 °C | DIN ISO 2115 |
| Protective colloid / emulsifier system | - | polyvinyl alcohol | - |
[Applications]
• Conventional waterproof plaster mortars
• General-purpose dry mix mortars
• Cost-sensitive mortar formulations requiring balanced performance
[Packaging]
25 kg paper bags; Big Bags or bulk on request.
[Storage]
During storage, protect the product from contact with moisture. Prolonged storage at temperatures above 30 °C, especially in combination with pressure, humidity or exposure to sunlight, may result in blocking. Carefully seal any open containers and store them under suitable conditions. We recommend storing the product in a warehouse that provides cool and dry conditions. Do not store the product for more than six months, starting from the date at which it was received, unless the Certificate of Analysis contains a different date, which would take precedence. If the product is stored longer than recommended, it may still be used but users are advised to verify the properties required for the intended use.
H Series
This is a special series focusing on strong water-repellent properties. Adding it significantly reduces the water absorption rate of mortar while maintaining adhesion and flexibility, making it particularly suitable for building applications requiring waterproofing.
A typical product is VINNAPAS 400 H, VINNAPAS 7031, VINNAPAS 8031 H,VINNAPAS 8034 H,VINNAPAS 5549 H, a flexible copolymer powder that can be used in waterproof mortars, exterior wall insulation system plastering mortars, mineral decorative mortars, etc. After film formation, it imparts long-lasting water resistance to the mortar without affecting its water vapor permeability.
VINNAPAS® 8031 H is another representative water-repellent product in this series, commonly used in exterior wall mortars and waterproof putties to enhance the material's ability to resist outdoor damp environments.
